Latest Version Support Online Offline Programming Dmx512 1990 TTL SPI Protocol LED ArtNet Controller T-790k

T-790

1. The T-790 controller has 8 output ports, and each port can load up to 170/512/1024 pixels (the number of load points varies according to different chips).

2. The T-790 controller port outputs two signal protocols:DMX512/1990 international standard protocol and DMX512 extended protocol; SPI/TTL serial protocol.
3. The T-790 controller is loaded with DMX512 lamps and can output 250K/500K/750Kbs rate.
4. When the T-790 controller is under the control of Maijues software, each port can carry 1/2/3/4/5/6 units of lamps (one unit = 170 point light sources).

General Features:
1. The output port of the controller provides three protections, which can ensure that the output port of the controller is not damaged in the case of short circuit or reverse connection of the controlled lamp.

2. The controller ID automatic/manual numbering function can be numbered together with multiple controllers, or can be numbered individually.

3. The controller comes with built-in effects, which can test on-board lamps (both RGB/RGBW lamps are supported).

4. The controller has DMX512 address writing function and address test, single port or all ports are loaded with DMX512 IC to write address, and perform address test on lamps.

5. The communication between the controllers adopts the international standard TCP/IP network protocol, the optional transmission rate supports 100M/Gigabit adaptive, the transmission speed is more stable and fast, and the maximum transmission distance between each two controllers can reach 100 meters, beyond this distance, you can add switches or use optical fibers for long-distance transmission.

6. The controller provides LCD display, which can display the model, ID, and working status of the control.

7. When using LedPlayer, our online video software, to control the connection to a computer, monitor the connection status of the controller in real time on the computer. Using the online video software LedPlayer for computer-connected control can realize: program timing playback, program segment selection, effect brightness adjustment, white balance online adjustment, program playback speed adjustment, display text, picture loop playback, etc. Various needs in debugging; the online video software LedPlayer comes with Gamma correction, which can make the color display more delicate and bright.

8. Set the IP address when the controller is connected to the computer for playback. The controller supports online and offline integrated control. The online priority is the highest. When there is no online signal, it will automatically switch to the offline effect.